Choices Lab Disposable

Remark
1. All cartridges are shipped in empty tank.
2. Cartridges will be packed in foam box.
3. The colors and strains will be randomly selected if not specified in orders.
Important notice: its empty cartridge with packing boxes, and if no mark for flavor request, we send it at random.
 

1. The device is equipped with a tank/batteries as well as a mouthpiece. Store the mouthpiece safely when filling the device.
2. Utilizing an syringe (or other filling instruments) Fill the device using only one of the outer two filling holes. Don't fill the middle hole. You should not ill two outer holes at the same time as one hole is necessary to let air escape during the drilling.
3.Push back the mouthpiece of the device until you can hear it click into place. Make sure you complete this process in less than one minute after filling the device.

AFTER FILLED
* Invert the device to its upside-down orientation after filling it. This will ensure that the oil in the device is cooled off from the coil.This can prevent any fracturing that might occur to the atomizer.
After the 30 minutes of lipping upside down, keep lipping it up on the right side. This will allow the oil to completely fill the coil. If the coil isn't completely saturated, it can result in dry strikes.
After you've finished the inverting procedure, place the device in an environment that has a temperature of between 68 and 77.5 degrees F.

ADDITIONAL INFORMATION
* Available in 1.0 ml
* The outer diameter of needles must be equal to 1.8mm.
Do not heat oil beyond 122 degrees F.
* The coil starts to absorb oil up to about 30 percent of the tank size. The volume of oil will visually reduced and headspace is created.

1. We are a Shezhen disposable carts producer that focuses on sales, production, and exports. We have over 5000 square meters dust-free workshop, over 500 employees and we have a production capacity of 300,000 pcs monthly.
2. Our production lines are mainly focused focus on cartridges, disposable pens, 510 thread battery as well as OEM service. All of our products have been tested and passed SGS, MSDS MSDS testing, ROHS testing, and CE testing. Every product we produce leaves our factory under strict quality control before being delivered to the customer. We won't disappoint you if you require quality products.
If there are any problems with the product or parts, as long as you can provide us with all relevant explanations, we will offer you a return service.
Responding to every problem you encounter within a short period of time and doing everything possible to resolve the issue. We will do our best to make sure that our customers are satisfied with both our services and products.
The seller should not lie to the customer.